PWM 10A - 12/24V Solar Controller & Bluetooth Adapter

This Solar Charge Controller comes with a Bluetooth Adapter that allows basic reprogramming such as battery type selection along with full monitoring of the solar panel power and state of charge of your battery bank via an iOS / android app or desktop computer. The app also allows control over the load very useful for setting timers for lighting applications.

Solar Controller Specifications

• Rated Charging Current: 10 amps
• Rated Load current Ie: 10 amps
• Maximum Solar Input Power: 120 Watts @ 12V - 240 Watts @ 24 Volts
• Over load, short circuit Protection: 1.25 times of Ie for 60secs 1.5 times of Ie for 5secs
• Overload protection: ≥ 3 times of Ie short circuit protection
• Self-consumption: ≤ 6mA
• System voltage: 12/24V
• Auto-set
• Work temperature: Industrial (l series):-35° to +55°
• Charging Circuit Voltage Drop: ≤ 0.26mA
• Discharging circuit voltage drop: ≤ 0.15mA
• Regulation point: 14.4 V 12 volt working; 28.80 24 volt working
• Low voltage disconnect: 11.1 V 12 volt working; 22.20 24 volt working
• Low voltage reconnect: 13.1 V 12 volt working; 26.10 24 volt working
• Temperature compensation: 0-10mV/°C/2V
• Control mode: PWM charging
• Dimensions: 153mm x 76mm x 37mm

Solar Controller Features

• Microcontroller digital accuracy
• Type of Charging Series PWM & state of charge(SOC)
• 4 Stages: equalization, PWM, Boost and Float,
• temperature compensated charging
• Electronic protections Short circuit and over current-solar and load
• Reverse polarity-solar, load and battery
• Reverse current at night
• Limits high voltage to protect loads
• Lighting protection
• Tropicalization Conformal coated printed circuit board
• Terminals For wire sizes to 6mm²

PRODUCT CODE: KIT10PWM_BT