Features
Controllers according to the MPP technology are continuously and automatically calculating the maximum power yield (MPP) of the solar modules several times per minute. The voltage surplus of the solar module will be transformed to a higher charging current for the battery (realised by high-frequency switching controller technology with high efficiency). This surplus of charging current ensures short charging times and the best possible power yield of the solar system.
Technical Details
Nominal Operating Voltage (AC) in [V] | 12 |
Capacity Solar Module max. [Wp] | 250 |
Current Solar Moddule max. [A] | 15.0 |
Voltage Solar Module max. [V] | 50 |
Charging Current Batt. I / II max. [A] | 17.5 / 1.5 |
Characteristic Line of Charging | IU1oU2 |
Battery Type adjustable | Acid/Lead-Acid, Gel, AGM, LiFePO4 |
Current Consumption Stand-by in [A] |
0.004 |
Overcharge Protection | yes |
Reverse Current Protection (during the night) |
yes |
On-board mains suppression filter |
yes |
Number of Charging Ports | 2 |
Protection against Overload, Overtemperature, Short-circuit |
yes |
Connection for Temperature Sensor |
yes |
Compensation of voltage loss on charging cables | yes |
Connection for LCD-Solar-Computer S |
yes |
Signal Output "EBL" for Display "Solar" Charging Current Battery |
yes |
Temperature Range [°C] | -20 to +45 |
Dimensions (WxDxH) in [mm] - Dimensions incl. mounting flanges, without connections | 131 x 40 x 77 |
Weight in [g] | 210 |
Mark of conformity (CE) | |
Ambient Conditions, Humidity of Air: max. 95 % RH, No Condensation | |
Delivery Scope: Operating Manual |
PRODUCT CODE: VMPP250