Victron MultiPlus 24V 3000VA 70-16A - 230V

PMP242300001 - The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.

Item Number:
PMP242300001
Your Price:
£1,062.00
Points:
237 Worth £11.85
Your Total:
Quantity:

Often Purchased Together

Victron Energy Interface MK3-USB (VE.Bus to USB)
Victron Energy Interface MK3-USB (VE.Bus to USB)
£61.25 | 20 Points
Victron Energy  Colour Control GX Monitor
Victron Energy Colour Control GX Monitor
£389.00 | 81 Points
Victron Energy Digital Multi Control 200/200A GX
Victron Energy Digital Multi Control 200/200A GX
£105.25 | 31 Points
Victron VE.Bus to NMEA2000 interface
Victron VE.Bus to NMEA2000 interface
£208.98 | 50 Points
Victron Energy VE.Bus Smart Dongle
Victron Energy VE.Bus Smart Dongle
£83.49 | 8 Points
Victron Digital Multi Control 200/200A
Victron Digital Multi Control 200/200A
£118.95 | 23 Points
Description

Specifications

  • Length (mm): 218
  • Width (mm): 258
  • Height Inc Terminals (mm): 362
  • Weight: 18kg
  • Continuous Output Power: 3000 VA - 2400W
  • Peak Power: 6000W
  • Output Wave Form: Pure Sine Wave
  • Voltage (V): 24
  • Transfer switch (A): 16
  • Input Voltage: 230V
  • Charge Current House Battery (Amps): 70
  • Charge Starter Battery (Amps): 4
  • Number of Outputs: 1
  • Frequency (Hz): 50
  • Ingress Protection: IP21
  • Remote Control: Yes
  • UPS: Yes
  • Warranty: 5 Years

Features of the - Victron MultiPlus Inverter Charger 24V/3000VA/70-16A - 230V

Two AC Outputs - the main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more).

Virtually unlimited power thanks to parallel operation - up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity.

Three phase capability - in addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity.

PowerControl - Dealing with limited generator, shore side or grid power - the MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.

PowerAssist - Boosting the capacity of shore or generator power - this feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.

Solar energy: AC power available even during a grid failure - the MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.

System configuring - in case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. - Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. - Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications).

On-site Monitoring and control - several options are available: Battery Monitor, Multi Control Panel, Ve.Net Blue Power Panel, Colour Control Panel, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).

Remote Monitoring - and control Victron Ethernet Remote, Victron Global Remote and the Colour Control Panel. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.

Remote configuring - when connected to the Ethernet, systems with a Color Control GX or other GX device Control panel can be accessed remotely and settings can be changed.


PRODUCT CODE: PMP242300001

You Might Also Like...

Sunshine Solar Limited
Your Cart
Your Cart: Empty

Need Help? 01508 488 188 - Mon-Fri 9AM - 5PM

Categories
Location
Home / Store / Victron MultiPlus 24V 3000VA 70-16A - 230V

Newsletters Signup

Sign up to Our Newsletter to receive special offers

card Logos
© 2024 Sunshine Solar Limited, all rights reserved worldwide.
Kryptronic eCommerce, Copyright 1999-2024 Kryptronic, Inc. - https://kryptronic.com/ [0.038574 / 1.486435]