Victron Quattro 12V/3000VA 120-50/50A-230V

QUA123020010 - The 3kVA Victron Quattro is a powerful true sine wave inverter, a sophisticated battery charger and a high-speed AC transfer switch in a single compact enclosure. The bigger brother of the Multiplus range, this unit is designed for industrial and commercial systems with multiple AC sources and differential loading, in addition to larger 3-phase systems. 

The Quattro can take an inputs from a generator and grid supply. It can be used in conjunction with a battery bank and solar PV inverter as an energy storage system. The unit has two AC outputs, one being programmable to only operate when shore/grid power is available; designed for heavy loads such as washing machines etc. Up to 10 Quattro units can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible.

Item Number:
Your Price:
350 Worth £17.50
Your Total:

Often Purchased Together

Victron Energy Interface MK3-USB (VE.Bus to USB)
Victron Energy Interface MK3-USB (VE.Bus to USB)
£68.95 | 20 Points
Victron VE.Bus to NMEA2000 interface
Victron VE.Bus to NMEA2000 interface
£208.98 | 50 Points
Victron Energy Digital Multi Control 200/200A GX
Victron Energy Digital Multi Control 200/200A GX
£130.25 | 31 Points
Victron Energy  Colour Control GX Monitor
Victron Energy Colour Control GX Monitor
£477.95 | 119 Points
Victron Energy VE.Bus Smart Dongle
Victron Energy VE.Bus Smart Dongle
£76.64 | 8 Points
Victon Battery Monitor BMV-712 Smart
Victon Battery Monitor BMV-712 Smart
£179.00 | 90 Points

Features of the - Victron Quattro 12V/3000VA 120-50/50A-230V 

Two AC inputs with integrated transfer switch 

The Quattro can be connected to two independent AC sources, for example the public grid and a generator, or two generators. The Quattro will automatically connect to the active source. 

Two AC Outputs 

The main output has no-break functionality. The Quattro takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, like a water heater for example, can be connected to this output. 

Virtually unlimited power thanks to parallel operation 

Up to 6 Quattro units can operate in parallel. Six units 48/10000/140, for example, will provide 54kW / 60kVA output power and 840 Amps charging capacity. 

Three phase capability 

Three units can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected to provide 162kW / 180kVA inverter power and more than 2500A charging capacity. 

PowerControl – Dealing with limited generator, shore side or grid power 

The Quattro is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (16A per 5kVA Quattro at 230VAC). A current limit can be set on each AC input. The Quattro will then take account of other AC loads and use whatever is spare for charging, thus preventing the generator or mains supply from being overloaded. 

PowerAssist – Boosting shore or generator power 

This feature takes the principle of PowerControl to a further dimension allowing the Quattro to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the Quattro will make sure that insufficient mains or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. 

Solar energy: AC power available even during a grid failure 

The Quattro can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. 

System configuring 

In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. - Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configuration software. - Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications). 

On-site Monitoring and control 

Several options are available: Battery Monitor, Multi Control Panel, V.E.Net Blue Power panel, Colour Control panel, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).  

Remote Monitoring and control 

Victron Ethernet Remote, Victron Global Remote and the Color Control Panel. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. 

Remote configuring 

When connected to the Ethernet, systems with a Color Control panel can be accessed and settings can be changed.


You Might Also Like...

Sunshine Solar Limited
Your Cart
Your Cart: Empty

Need Help? 01508 488 188 - Mon-Fri 9AM - 5PM

Home / Store / Accessories / Regulators/Controllers / Victron Quattro 12V/3000VA 120-50/50A-230V

Newsletters Signup

Sign up to Our Newsletter to receive special offers

card Logos
© 2024 Sunshine Solar Limited, all rights reserved worldwide.
Kryptronic eCommerce, Copyright 1999-2024 Kryptronic, Inc. - [0.076794 / 1.507797]