Victron BlueSolar PWM LCD & USB 12/24V 5A
SCC010005050 - The BlueSolar Charge Controller series uses Pulse Width Modulation (PWM) charge voltage control combined with a multistage charge control algorithm.
Features of the - Victron BlueSolar PWM LCD & USB 12/24V 5A
Liquid crystal display
For status monitoring and set-up.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage.
Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.
The connect and disconnect voltages are adjustable.
Day/night timing of the load output
This option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithm
Pre-programmed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only).
Two 5 Volt USB outputs
Maximum current (both outputs combined): 2A
PRODUCT CODE: SCC010005050
You Might Also Like...
Home
