Victron Energy Galvanic Isolator VDI-32 Victron Energy Galvanic Isolator VDI-32 Default Manufacturer The galvanic isolator consists internally of two diodes which are connected in anti-parallel fashion. When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc. The isolator is installed directly behind your boat's 230V connection. The forward voltage from the galvanic isolator is higher than the potential difference between metals. As a result, this voltage will not allow conduction and as such, the galvanic isolator will prevent any electrolytic current. However, if there is a (higher) error voltage in the AC circuit, the diodes will allow current through and the residual-current device will break the circuit. GDI000032000 GDI000032000 211.79 Sunshine Solar Limited

Victron Energy Galvanic Isolator VDI-32

Victron Energy Galvanic Isolator VDI-32

The galvanic isolator consists internally of two diodes which are connected in anti-parallel fashion. When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc.  

The isolator is installed directly behind your boat's 230V connection. The forward voltage from the galvanic isolator is higher than the potential difference between metals. As a result, this voltage will not allow conduction and as such, the galvanic isolator will prevent any electrolytic current. However, if there is a (higher) error voltage in the AC circuit, the diodes will allow current through and the residual-current device will break the circuit.

Item Number:
GDI000032000
Your Price:
£211.79
Points:
42 Worth £2.10
Your Total:
Quantity:
Description

Galvanic Isolator Waterproof (potted) 

Maximum current: 32 A 

Peak current (20 ms): 3200 A 

Connection: M6 

Heat sink Material Anodized aluminium 

Protection category: IP 67 

Weight: 2 kg 

Dimensions: (hxwxd) VDI-32 63 x 164 x 200 mm 

Warranty: 2 Years 

Layout: RH+

Features

The galvanic isolator prevents electrolytic corrosion. It blocks low voltage DC currents that enter your boat via the shore power earth wire. These currents can cause corrosion to the boat’s underwater metals, like the hull, propeller, shaft and so on. The galvanic isolator consists internally of two diodes which are connected in anti-parallel fashion. When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc.  

The isolator is installed directly behind your boat's 230V connection. The forward voltage from the galvanic isolator is higher than the potential difference between metals. As a result, this voltage will not allow conduction and as such, the galvanic isolator will prevent any electrolytic current. However, if there is a (higher) error voltage in the AC circuit, the diodes will allow current through and the residual-current device will break the circuit.


PRODUCT CODE: GDI000032000

Sunshine Solar Limited
Your Cart
Your Cart: Empty

Need Help? 01508 488 188 - Mon-Fri 9AM - 5PM

Categories
Location
Home / Accessories / Regulators/Controllers / Victron Energy Galvanic Isolator VDI-32

Newsletters Signup

Sign up to Our Newsletter to receive special offers

card Logos
© 2019 Sunshine Solar Limited, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2019 Kryptronic, Inc. Exec Time: 0.148383 Seconds Memory Usage: 1.328049 Megabytes
Kryptronic